CT-2012台湾路昌控制/警报/显示表头
功能介绍：
1、信号输出：直流 4-20mA
2、四位LED显示，字高14mm；精度：SPAN±(0.15%+2D)FS，ZERO±(0.1%+2D)FS
3、反应时间：1秒
4、依照 4 ~ 20mA信号，显示器能做-1999 ~ 9999 设定调整
5、继电器输出:AC0.5A/250V或DC0.5A/24V
6、控制输出:常开接点N.O.
7、警报输出:常开接点N.O.
8、适用于Lutron公司所生产之各种传送器
9、工作电压：240V
10、内建直流电压12V输出
11、附计算机连接接口,( 应用软件及RS232 / USB Cable 选购 )
12、外观尺寸：96mm × 48mm × 110mm
13、显示/控制/警报器和传送器之间可用一般导线连接线长限100米内
14、保修期：1年
技术规格：
Model Input(输入模式) |
Linear, 4- 20 mA |
Display(显示方式) |
According the 4-20 mA input signal, user can preset the desire display value between -
1999 to 9999 (decimal point can select to DP1 , DP2 , DP3).Until set the display value,
all the data will save into the memory circuit permanently |
Output(输出方式) |
Relay contact output :5A/240 VAC(resistive load)
Control output : 3 points , NCAlarm output : 2 points |
Control Modes(控制方式) |
ON/OFF Control :Hysteresis or Proportional control (band 5%)
* Cooling action or heating action can be selected.chern. |
Alarm Modes(警报方式) |
Deviation high alarm, Deviation low alarm.
PV high alarm, PV low alarm. |
Sample Time(取样时间) |
2 times/second. |
Display Offset Adj(抵补调整) |
Can make the adjustment |
Default |
Without advice previously, the function of CT-2002-MA will Preset Display value to
4 mA=0 , 20mA=9999.The Control Model will set to ON/OFF Control,heating action.
The Alarm Modes will set to Deviation high alarm. |
Power Supply(工作电源) |
90 ACV - 264 ACV, 50/60Hz |
Power Consumption(消耗功率) |
Less than 3 VA |
Temperature(工作温度) |
0 to 50℃32 - 122? |
Humidity(工作湿度) |
Less than 85 % RH (Non condensed). |
Dimension(外观尺寸) |
Case:96× 48 ×80 mm.
Panel cut size :92mm × 45mm |
CT-2002-MA
适用LUTRON的产品系列 |
The CT-2002-MA can cooperate all the LUTRON transmitters then whole System will be become the useful Controller/Alarm/Indicator for following measuring function: taih.
Humidity , Light , PH , Dissolved Oxygen , Conductivity , Vibration Pressure
Sound , Temperature , RPM , Hz , Load cell (Weight,Force) , Potential (Angle ,
Level) , ACV , ACA , DCV , DCA , WATT , VAR , Power Factor |
|
产品分类
